Deep purple ribbing, softly slouchy shaping, and smoky-gray raised puffs give the Lottie Beanie its unmistakable texture. This guide looks at the photographed project, its materials and construction, and practical choices for a comfortable fit.
About the Lottie Beanie
The Lottie Beanie pairs a softly slouchy shape with a deep, stretchy ribbed band and bold raised gray puff-stitch rounds. In the sample shown here, grape purple frames the smoky-gray puffs, giving the fabric a strong two-color rhythm without adding a pom-pom or a separate crown piece.
This guide is organized to help you understand the project, plan materials, assess fit, and follow its construction stages. The supplied HookElla images remain the featured and construction visuals for this exact Lottie design.
Why makers may enjoy this project
- The deep ribbed band gives the lower edge a close, flexible fit.
- Raised puff rounds create a tactile surface and make the contrast shade stand out.
- The body grows upward from the band, so the crown is gathered at the end rather than crocheted as a separate disk.
- The design is written in a broad size range, from newborn through Adult Large.
Project overview
| Detail | Lottie Beanie |
|---|---|
| Shape | Softly slouchy crochet cap |
| Construction | Ribbed band first, then body worked upward in joined rounds |
| Texture | Purple background rounds with raised contrasting puff-stitch rounds |
| Sample colors | Grape purple and smoky gray |
| Sample size | Teen/Adult Small, about 21 in circumference × 8.5 in long |
| Size range | Newborn through Adult Large |
Materials and tools
Yarn and color planning
The photographed sample uses Berroco Comfort Chunky, a bulky yarn made from 50% acrylic and 50% nylon. Its shades are Color A 5739 Grape Jelly (deep purple) and Color B 5728 Smoke Stack (smoky gray). The pattern’s yarn amounts vary by size, so consult its materials list for the exact yardage for your selected size.
The high-contrast palette makes the raised gray puffs easy to see against the purple background. If choosing another palette, select shades that remain distinct in both daylight and indoor light. A smooth yarn with clear stitch definition helps the puff texture read cleanly; a different yarn construction can change the puff size, drape, warmth, and yardage.
Hooks and notions
- 5 mm crochet hook for the band and foundation.
- 5.5 mm crochet hook for the textured body.
- Yarn needle for seaming and gathering the crown.
- Stitch markers, scissors, and a flexible tape measure.
Size and fit
The pattern includes ten sizes, from newborn through Adult Large. The photographed sample is Teen/Adult Small and measures about 21 inches in circumference by 8.5 inches long. Treat those as the sample measurements, not a universal fit recommendation. Measure the intended wearer and use the designer’s size table to choose the closest circumference and preferred ease.
Gauge matters because the band needs comfortable stretch while the body needs enough drape for the slouch. Make the designer’s gauge swatch with the specified yarn and body hook, then compare it with the pattern’s stated gauge before selecting a size. If your swatch is off, adjust hook size and recheck; changing gauge affects both circumference and length. Use the original pattern’s gauge and size instructions rather than relying on the sample dimensions alone.
Construction overview
1. Work the ribbed band flat
The band is crocheted back and forth in back-loop-only single crochet. This creates the vertical ribbing and stretch seen around the lower edge. Work to the size specified in the complete pattern, then join the short ends to form the band ring.
2. Build the body from the band
The hat body is then worked upward from the band in joined rounds. Purple background stitches form the main fabric, while the contrasting gray puff rounds add raised texture. Keep the joins aligned and manage the color changes as directed in the designer’s pattern so the back transition stays tidy.
3. Gather the crown
At the end of the body, the crown is gathered closed by drawing the remaining stitches together with the working tail and a yarn needle. Distribute the gathers evenly, secure the closure, and weave the tail inside. The pictured design has no separately crocheted crown, pom-pom, or extra decoration.
The construction infographic shows the band, its join, the growing body, a close view of the puff texture, crown gathering, and the finished silhouette. It is a visual companion—not a substitute for the pattern’s size-specific instructions or stitch counts.
Choosing a comfortable yarn
For a chemo cap, comfort is individual. Fiber feel, warmth, stretch, and laundering preferences vary, so involve the intended wearer in yarn selection when possible. Make a swatch they can handle and follow the yarn label for care. This guide makes no medical claims and does not promise a particular comfort or health outcome.
Finishing and care tips
- Keep the band seam smooth and avoid a bulky join at the back.
- When gathering the crown, spread the draw-up evenly before securing it.
- Weave in ends on the inside without flattening the raised puff rounds.
- Wash and dry according to the yarn label, then reshape gently while damp if needed.
- Avoid high heat or aggressive blocking that could flatten the texture or reduce the band’s stretch.
Frequently asked questions
Is this page the complete row-by-row pattern?
No. This HookElla page is a detailed project guide and construction overview. The complete pattern belongs to its designer and is linked in the credit section below; this page does not reproduce its row-by-row instructions, stitch counts, or size-specific sequence.
Which size is shown in the sample?
The photographed sample is Teen/Adult Small, approximately 21 inches around and 8.5 inches long. The pattern offers ten sizes from newborn through Adult Large.
Why are two hook sizes used?
The 5 mm hook is used for the band and foundation, while the 5.5 mm hook is used for the body. Follow the designer’s gauge instructions to confirm the fabric and fit before making the full cap.
Can I substitute the yarn?
Yes, but choose a bulky yarn with a similar thickness and swatch the ribbing and puff fabric. Fiber, twist, and loft can affect stretch, drape, puff definition, warmth, and yardage.
Does the design use a pom-pom or separate crown piece?
No. The body is gathered closed at the crown with its yarn tail; the pictured design has no pom-pom or separate crown disk.
More HookElla wearables
Use PUFELLA when sharing this project so readers can find the HookElla guide. Browse the HookElla Wearables & Accessories collection or try the independently written Cloudridge 3D Beanie.
Pattern credit and complete instructions
The Lottie Beanie is designed by Marie Segares of Underground Crafter. The full stitch-by-stitch pattern is not reproduced here. Please use the designer’s complete instructions for all row and round directions, stitch counts, and size-specific details:
- Free Lottie Beanie pattern by Underground Crafter
- Lottie Beanie pattern listing on Ravelry (the downloadable PDF may be paid; check the listing for current terms)
Helpful questions
Is this page the complete Lottie Beanie pattern?
No. This is a project overview, not the full row-by-row pattern. The designer's complete instructions are linked in the pattern-credit section at the end.
What yarn and hooks are used in the photographed sample?
The reference sample uses bulky Berroco Comfort Chunky yarn and a 5 mm hook for the band and foundation, then a 5.5 mm hook for the body.
How is the beanie constructed?
A flat back-loop-only single-crochet ribbed band is seamed into a ring. The body is worked upward from the band in joined rounds, then the crown is gathered closed.
